#Recalbox 4.1 themes download#

Connect the Micro USB power cable to the 5V battery charger. Connect a USB keyboard to the USB port of the Raspberry Pi trhough a microUSB to USB convertor.Д§. Connect an HDMI screen to the mini HDMI port of the Raspberry Pi 0W through a mini HDMI to HDMI convertor.ДҐ.

Insert 16G TF card to the TF card slot of the Raspberry Pi 0 W.ДҐ. Use Etcher or other Sdcard burner - to burn the Recalbox boot image to 16G TF card.Д¤. The Recalbox boot image already comes with some freeware game roms.

#Recalbox 4.1 themes download#

Download the Recalbox 2018 12 24 Xmas beta boot image for Respberry Pi 0.Дў.

Cover up the back of the PCB with an argylic board and secure it with screws.ДЎ.

Solder up the 5V battery charger circuit board, the sliding switch and the battery to the 5V and ground pins of the Raspberry Pi according to the circuit diagram.

Solder up the 10 uF capacitors, the headphone jack and the speakers as shown in the circuit diagram.

Solder one end of the button to ground, and the other end to the right GPIO pin of Raspberrry Pi following the pin layout.

The LED pin of LCD connects via a 50K VR to the 3V for brightness adjustment.

Using 0.2 or 0.3mm Laminated (insulated) wires, solder up all the connections from the TFT LCD to the Raspberry Pi following the circuit diagram and the pin layout.

Mount the raspberry pi zero W at the back side of the PCB.

Insert the pins through the PCB into the 9 pin female header at the other side of the PCB.

Mount the 2.2вЂњ TFT LCD to the front of the PCB.

Solder the buttons as shown in the layout to the front side of the PCB.

This project uses a double-sided 7x9 cm prototype PCB as the frame of the game console.